Crown
Board: Other Sports Cars
Language: English
Region: Worldwide
Close
CloseForum - Thread
Re: Torsional rigidity
CF,
Perhaps you should ask Lund University? They must know, to be able to make the statement that the torsional rigidity of the Koenigsegg "is superior to that of any competitor".
Unless, of course, they don't think the Koenigsegg is a worthy competitor to the CGT?
fritz
Perhaps you should ask Lund University? They must know, to be able to make the statement that the torsional rigidity of the Koenigsegg "is superior to that of any competitor".
Unless, of course, they don't think the Koenigsegg is a worthy competitor to the CGT?
fritz
Apr 29, 2004 8:29:30 PM
-
Ron (Houston)
- Rennteam Moderator
-
- Loc: Houston, TX , United States
- Posts: 8812, Gallery
- Registered on: Apr 10, 2002
-
Reply to:
CF
Apr 29, 2004 8:42:33 PM
-
CF
- Rennteam Moderator
-
- Loc: Florida , United States
- Posts: 1113, Gallery
- Registered on: Mar 30, 2003
-
Reply to:
Ron (Houston)
Re: Torsional rigidity
I believe the number is the same for both models.
http://www.koenigsegg.se/thecars/engineering.asp?engineering=1
http://www.koenigsegg.se/thecars/engineering.asp?engineering=1
Re: Torsional rigidity
Quote:
CF said:
Torsional rigidity of the Koenigsegg.
"The monocoque has been evaluated by the University of Lund, and found to have a torsional rigidity of 28.100 Nm/degree, which is superior to that of any competitor."
Question What is the torsional rigidity of the Carrera GT?
I also have a simple question: where does the University of Lund have the comparison data from the competition from? Directly from Ferrari and Porsche? I doubt it. Did they test it on the Enzo and CGT? I doubt that too.
I don't say it is not true but I really wonder where the University of Lund got the info from.
Apr 29, 2004 10:00:12 PM
-
Carlos from Spain
- Rennteam Moderator
-
- Loc: Spain. , Spain
- Posts: 21148, Gallery
- Registered on: Feb 9, 2003
-
Reply to:
CF
Re: Torsional rigidity
Quote:
CF said:
Torsional rigidity of the Koenigsegg.
"The monocoque has been evaluated by the University of Lund, and found to have a torsional rigidity of 28.100 Nm/degree, which is superior to that of any competitor."
28.100NM/degree superior to that of any competitor? interesting... then the Audi A6 must be in a superior class than the Koenigsegg cause this BBC article quotes 36,000Nm/degree for the new Audi A6 with its aluminum chasis
http://www.topgear.com/content/features/stories/geneva_2003/08/
BTW, Porsche 911 Turbo has a torsional stiffnes of 27,000 Nm/degree, and the Phamtom's I believe is the stiffest that I know of with 40,500Nm/degree
Forum
About Rennteam | Help | Terms of use | Privacy Policy | Support | Contact | Imprint | Archive
Powered by
Community
and
