Crown
Board: Porsche - 911 - 997
Language: English
Region: Worldwide
Close
CloseForum - Thread
Re: LED backlights for 997 first generation
Now these are looking muuuuuch better than the first ones! 
I think it's because the white parts mimic the shape of the original 997.2 lights much better than the lights that were posted by easy. At least that is when the lights are off. I would be interested to see them in the dark now, Lars would you be so kind? 
--
The secret of life is to admire without desiring.
Mar 5, 2011 6:09:21 PM
-
Carlos from Spain
- Rennteam Moderator
-
- Loc: Spain. , Spain
- Posts: 21149, Gallery
- Registered on: Feb 9, 2003
- Reply to: Atzporsche
Re: LED backlights for 997 first generation
Lars997:
For me they are absolutely what I'm looking for. Looking almost like the 997.2. taillights.
This ones are a lot better indeed! Good choice!
--
965 3.3turbo/ 993 targa / 996 cab /997S cab
Audi R8 // Audi A5 S-line 3.0tdi Quattro/ RR 4.4i
Mar 6, 2011 12:58:32 PM
-
Super Darius
- Rennteam Moderator
-
- Loc: Italy-Como , Italy
- Posts: 4084, Gallery
- Registered on: Apr 7, 2002
-
Reply to:
Lars997
Mar 6, 2011 1:08:02 PM
- reginos
- Rennteam VIP
-
- Loc: Nicosia , Cyprus
- Posts: 12130, Gallery
- Registered on: Mar 20, 2005
-
Reply to:
Super Darius
Re: LED backlights for 997 first generation
reginos:
If the rears are changed, then something must be done for the front side/parking lights too. These wouldn't match the more modern rear LEDs. Anyone suppliers front LEDs? Perhaps Techart?
Techart has some front LEDs. Unfortunately they are not integrated in the bumper-lights. So I dont like it as they would look like just cheap tuning. Further on, the rear LEDs are plug and play, but for the front you have to do additional wiring.
Re: LED backlights for 997 first generation
I would never install additional LED daytime running lights at the front of a 997.1. If you plan to install LED at the front, they have to be integrated into the OEM foglights/indicators.
Doesn't RUF have a solution for that? 
--
The secret of life is to admire without desiring.
Mar 8, 2011 5:51:49 PM
- HeavyMetalThunder
- Co-Pilot
-
- Loc: CH , Switzerland
- Posts: 164, Gallery
- Registered on: May 24, 2009
-
Reply to:
Gnil
Oct 21, 2011 9:15:51 PM
- Nastinupe1
- Newbie
-
- Loc: Atlanta, Georgia, USA
- Posts: 36, Gallery
- Registered on: Jun 12, 2008
- Reply to: HeavyMetalThunder
Oct 22, 2011 10:36:06 AM
- bluelines
- Rennteam VIP
-
- Loc: Argovia , Switzerland
- Posts: 11655, Gallery
- Registered on: Apr 29, 2005
- Reply to: HeavyMetalThunder
Re: LED backlights for 997 first generation
HeavyMetalThunder:
Gnil:
I would just keep the standard lights .......back and front .
+1
I prefer the 997.1 standard lights, especially in the front..
+2 
--
997.2 Carrera S in Carrara White. PASM-Sport Suspension (-20 mm), PSE.
987.1 Boxster S in Arctic Silver. OZ Racing Ultraleggera HLT Wheels, H&R Monotube Coil-Over Suspension, H&R Anti-Roll Bars, Sachs Racing Clutch, Single-Mass Flywheel, Recaro Pole Position Seats, PSE.
Re: LED backlights for 997 first generation
Very nice.
I have a much older 911. I converted mine to run on LED's. I kep the standard lenses, but the effect was an overal improvement in brightness.
It was also very cheap that way too.
--
______________________________________________
www.p101tv.com
Re: LED backlights for 997 first generation
anybody care to see this? (ugly though in my opinion)
--
heads you live, tails you die
Re: LED backlights for 997 first generation
I've seen one yesterday in Zürich. First I thought it was a 991 and from the back I saw that it was a 997.1 with LEDs.
Have to say it looked good, but I wouldn't do it myself. I personally would consider the LEDs but not the 991 spoiler.
--
2012 Cayenne S White/Espresso
Ex: 993 Targa, 986S, 986 and 964 C2
Forum
About Rennteam | Help | Terms of use | Privacy Policy | Support | Contact | Imprint | Archive
Powered by
Community
and
