Crown
Catégorie: Porsche
Langue: English
Région: Worldwide
Close
CloseForum - Fil de discussion
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Well, I guess that they are in the final stages of testing the cars, also trying to put as many miles on them as possible, to see if any long-term issue appear. Additionally, it is important from a marketing perspective to keep the buzz alive. I wish we would see some nearly uncammoed examples though!
--
Porsche, seperates LeMans from LeBoys
31 mai 2011 19:42:05
- mateoche
- Co-Pilot
-
- Lieu: Santa Monica, CA
- Messages: 243, Gallery
- Inscrit depuis le: 19 avr. 2004
-
En réponse de:
Ron (Houston)
Re: Porsche 991 GT3 to include GT1 motorsport engine...
991 to get 7-speed three-pedal manual transmission?
check this link out to Motor authority's article (from Car and Driver)---
Re: Porsche 991 GT3 to include GT1 motorsport engine...
With my former C2S 6-gear stick manual I almost always skipped 5th gear and moved from 4th to 6th. This was mainly because I'd always exceeded the speed limit in 4th and there was no need to use 5th for further acceleration.
PDK uses 7th as an overdrive in normal mode.. and that's acceptable for economy, but I really can't see any benefit in having 7 forward gears with a stick!
--
"Things turn out best for people who make the best of the way things turn out."
Re: Porsche 991 GT3 to include GT1 motorsport engine...
John H:
PDK uses 7th as an overdrive in normal mode.. and that's acceptable for economy, but I really can't see any benefit in having 7 forward gears with a stick!
There's a big advantage on the track (certainly for the GT3). The current GT3 has its gears too far apart (big gap between 2nd and 3rd and 2nd is a bit too tall for many slow corners. Being able to re-stack the gears lower and closer will bring big performance gains.
--
73 Carrera RS 2.7 Carbon Fiber replica (1,890 lbs). Former: 73 911S, Two 951S's, 996 C2, 993 C2, 98 Ferrari 550 Maranello
Re: Porsche 991 GT3 to include GT1 motorsport engine...
I say do 1-2-3-4-5-6 in the first 3 set, and then have the 4th set R and 7th. That way 7th will make no intrusions with the gears that should be focused on. Maybe don't call it 7th, call it "E", so the tranny is still a "6 speed". I like that Porsche is trying to make the manual transmission better and more efficient, instead of forgetting about it and the enthusiasts, and just bringing in this double clutch bull$^^t.
Re: Porsche 991 GT3 to include GT1 motorsport engine...
No, I like the picture abover (and the old 901 gearbox). Reverse and the grear youonly use for a second (1st) are off by themselves. The gears you "row" through are all together.
That said, if they do come out with a 7 speed and 6th gear is an overdrive as well it would be annoying. I think this will be the next big "found performance" gig that many companies do. Few people need a GT3RS to do 190+ mph. But if it was geared to do 165 mph you could use all of the gears on the track (where the car would be much faster becauseof the lower gears) and still have fine gas economy. A super tall 7th for gas economy and 2-6 gear good for 30-165 mph would make for a much faster car over-all.
--
Past-President, Porsche Club of America - Upper Canada Region
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Far too many gates for manual.
I would suggest putting the shifter on the steering column and then separate up shift and down shift on either side with paddles that are easy to reach while holding the steering wheel with 2 hands.
Since we are modifying the process of shifting, why not put a electronic clutch to speed up shifting and match revs up and down? The driver still needs to select the correct gear himself but much faster than conventional methods.
I think I am genius in revolutionizing car transmissions. But then again it sounded awfully like what is offered in PDK. 
1 juin 2011 05:35:02
- Spyderidol
- Rennteam Master
-
- Lieu: Mozambique
- Messages: 5807, Gallery
- Inscrit depuis le: 25 avr. 2007
-
En réponse de:
Whoopsy
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Whoopsy:
Far too many gates for manual.
I would suggest putting the shifter on the steering column and then separate up shift and down shift on either side with paddles that are easy to reach while holding the steering wheel with 2 hands.
Since we are modifying the process of shifting, why not put a electronic clutch to speed up shifting and match revs up and down? The driver still needs to select the correct gear himself but much faster than conventional methods.
I think I am genius in revolutionizing car transmissions. But then again it sounded awfully like what is offered in PDK.
7th gear on a manual gearbox, could be activated by a button on the shifter.
I saw a 70s Triumph Spitfire that had the H pattern and reverse, but with a button on the knob you could select overdrive gears 3 1/2 and 4 1/2. If the button was on, you could go from 3 1/2 to 4 1/2 directly, if you wished. So it was 6 gears but with an H gate.
Since the 7th gear will be an overdrive for fuel economy and lowering emissions, electrical selection is the best way IMO.
--
"Form follows function"
Re: Porsche 991 GT3 to include GT1 motorsport engine...
7th can be engaged electrically. It is an overdrive gear for highway economy and to lower regulation consumption and emissions, which you won't need on the track. The other 6 and reverse are like in a normal manual gearbox.
--
"Form follows function"
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Guy:
I don't see how 7 gears works on a manual on track, unless 1st gear or 7th is on some sort of lockout or electronic only shift, otherwise where does the gearlever centre to, since you have 4 'planes' of gears?
Exactly. It's a conspiracy by Porsche, to move all of us luddites into the PDK camp. A couple of years of confusion trying to master this new 7-speed manual, and we will all start wishing for an automated version.
Re: Porsche 991 GT3 to include GT1 motorsport engine...
reginos:
7th can be engaged electrically. It is an overdrive gear for highway economy and to lower regulation consumption and emissions, which you won't need on the track. The other 6 and reverse are like in a normal manual gearbox.
It seem`s to be more logical.
Volvo 740 in the 80`s add a similar solution.
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Guy:
I don't see how 7 gears works on a manual on track, unless 1st gear or 7th is on some sort of lockout or electronic only shift, otherwise where does the gearlever centre to, since you have 4 'planes' of gears?
You have to press down to access the last gate (like the way you select reverse in an old Golf)
--
73 Carrera RS 2.7 Carbon Fiber replica (1,890 lbs). Former: 73 911S, Two 951S's, 996 C2, 993 C2, 98 Ferrari 550 Maranello
Re: Porsche 991 GT3 to include GT1 motorsport engine...
If anyone is about to try to upgrade the traditional manual for a new age, perhaps better to just use an in-line sequential gearbox - maintain the need to shift up and down, allow very fast shifts, but eliminate the clutch pedal. I know these are mostly racing-oriented now, but could be re-engineered to be more road-usable.
--
2011 Range Rover Sport S/C, 2009 Porsche 911S
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Grant:
Guy:
I don't see how 7 gears works on a manual on track, unless 1st gear or 7th is on some sort of lockout or electronic only shift, otherwise where does the gearlever centre to, since you have 4 'planes' of gears?
You have to press down to access the last gate (like the way you select reverse in an old Golf)
So you're saying that every time you want to pull away in first gear you'd need to push down and go through a clunky engagement like you describe on older cars for reverse? I cannot see that being acceptable in a Porsche (might be ok in a truck that rarely uses 1st gear unless fully loaded and on a hill).
4 juin 2011 18:53:12
-
Carrageous
- Veteran
-
- Lieu: Austin, TX , Etats-Unis
- Messages: 1197, Gallery
- Inscrit depuis le: 5 sept. 2003
- En réponse de: Guy
Re: Porsche 991 GT3 to include GT1 motorsport engine...
No, it was a little clunky getting into first on the older gearbox, but it was designed to spring right up to second when you shifted. You could literally do it with two fingers.
I'm speaking of a late 1960s box.
--
"We all love the music. What we hope is that the music loves us." -- Tom Waits
4 juin 2011 20:02:40
- Boxster Coupe GTS
- Rennteam Master
-
- Lieu: UK , Royaume-Uni
- Messages: 5886, Gallery
- Inscrit depuis le: 23 févr. 2005
- En réponse de: Carrageous
6 juin 2011 21:37:18
- KMM
- Expert
-
- Lieu: Boston, MA , Etats-Unis
- Messages: 1745, Gallery
- Inscrit depuis le: 5 févr. 2004
- En réponse de: Carrageous
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Carrageous:
No, it was a little clunky getting into first on the older gearbox, but it was designed to spring right up to second when you shifted. You could literally do it with two fingers.
I'm speaking of a late 1960s box.
My 914 was like that. 1st was left and down (dog-leg first); a spring pushed the shifter to line up with the 2nd-3rd gate; perfect.
Re: Porsche 991 GT3 to include GT1 motorsport engine...
KMM:
My 914 was like that. 1st was left and down (dog-leg first); a spring pushed the shifter to line up with the 2nd-3rd gate; perfect.
Yeah, I had a BMW 635CSi (Euro) like that too - great car and great gearbox (close-ratio with LSD).
--
73 Carrera RS 2.7 Carbon Fiber replica (1,890 lbs). Former: 73 911S, Two 951S's, 996 C2, 993 C2, 98 Ferrari 550 Maranello
Re: Porsche 991 GT3 to include GT1 motorsport engine...
CPA4S:
i still think the new Boxster is looking really good. the rear end has more agressive look
Note the camouflage panel on the door and the rear fender. My guess is that there is some kind of depression (concave curve) in the door skin, leading to the side vent in the fender.
Re: Porsche 991 GT3 to include GT1 motorsport engine...
Does any one know the reason behind naming this model 991?
I always thought it's related to engine size or something but it's not. Also I got feeling that Porsche doesn't want to move the number to 998 because then the 9XX series will end. Poor Porsche they were skipping so many number now they ran short of names 964 , 993 , 996 , 997 , 991
Forum
À propos de Rennteam | Aide | Conditions d’utilisation | Protection des données | Support | Contact | À propos de ce site | Archive
Propulsé par
Community
et
