Quote:
bingo said:
Quote:
STRADALE said:
Quote:
Alcyon said:
GP7 wheels here with Poggipolini Titanium 58mm same length than oem. No problem at all. Several thousands kms, reaching 300+ km/h and everything ok, so far... just be careful tightening, i use the factory recommended cipher 130Nm. and Optimol Paste TA.




I was just going to reply that the stock bolts were the same exact length as the titanium ones I got. (guess thats the 58mm) As for the Titanium bolt ball seat shape they are the same as stock too so if the wheels accept stock bolts they should be fine w/ the Titanium's. Running Champions RS171's here. Ft lbs at 95 and no problems whatsoever w/ loosening or seizing after 5000 miles, every bolt stays exactly the same ft lbs as when they were first put on.



I have just recieved a email from the supplier of the wheels and this is what it said,

They will not work. The supplied bolts are much smaller dia. at the flange to
fit the holes in the wheels. The bolts you sent the pdf of will probably not
even fit in the holes. Also, they have the wrong seat. The GP7 uses a
cone seat
while the other bolts have a round seat. I don't understand this. Why not just
use the bolts that were supplied with the wheels that 100% work perfectly?

So I guess I am stuck witht he bolts that were supplied with the wheels




Like I said the wheels need to be like stock ( or Champions) to work w/ Poggipolini's. The GP7's cone are obviously different than stock. Definitely dont use Poggipolini's or stock bolts on GP7's.